
The finished asphalt is the most visible part of a resurfacing project, but on this job, the work started with preparing the pavement already in place.
Refreshing a Worn Columbia Parking Lot
The existing parking lot was worn and ready for a refreshed surface. Our scope focused on resurfacing the pavement rather than constructing an entirely new parking lot.
Before any new asphalt was placed, we worked through a straightforward sequence:
- Clean the existing pavement.
- Apply tack to the prepared surface.
- Place the 2-inch asphalt overlay.
Each step had a specific role in moving the project from the existing surface to the new asphalt. The preparation came first, followed by the bonding step and then the overlay itself.
Cleaning and Tack Come Before the New Asphalt
Preparation began with cleaning the existing pavement. Loose material and debris can interfere with the surface that the new asphalt will be placed over, so cleaning comes before the bonding step.
Once the pavement was prepared, we applied tack.
Tack is used between an existing asphalt surface and a new overlay to promote bonding between the two pavement layers. That bond helps the old and new asphalt function together rather than behaving as separate surfaces.
On this Columbia project, cleaning and tack were part of the resurfacing scope from the start. Only after those preparation steps were complete did our crew move on to placing the new asphalt.
The finished surface may get most of the attention, but the work underneath it is part of the overlay process too.
Completing the Refresh With a 2-Inch Asphalt Overlay
After cleaning the pavement and applying tack, our crew installed a 2-inch asphalt overlay across the parking area.
The new asphalt created a broad, continuous finished surface with a generally uniform appearance and consistent visible texture. It covered the worn existing pavement and gave the parking lot a clean, refreshed finish.
For this project, the 2-inch overlay completed a resurfacing scope that began with preparation of the existing surface. The result was a freshly paved parking area ready to return to regular use.
If you have a worn parking lot in Columbia, contact us to discuss its current condition and whether asphalt resurfacing or another paving approach makes sense for the property.



